View W49180-08_8356527.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 www.seoulsemicon.com www.seoulsemicon.com 1 document no. : ssc - qp - 7 - 07 - 24 (rev.00) w49180 - 08 ?? features ? super high flux output and high luminance ? designed for high current operation ? low thermal resistance ? smt solderable ? lead free product ? rohs compliant applications ? mobile phone flash ? automotive interior / exterior lighting ? automotive signal lighting ? automotive forward lighting ? torch ? architectural lighting ? lcd tv / monitor backlight ? projector light source ? traffic signals ? task lighting ? decorative / pathway lighting ? remote / solar powered lighting ? household appliances z - power series is designed for high current operation and high flux output applications. z - power led's thermal performance exceeds other power led solutions. it incorporates state of the art smd design and thermal emission material. z power led is ideal light sources for general illumination applications, custom designed solutions, automotive and large lcd backlights. w49180 - 08 *the appearance and specifications of the product may be changed for improvement without notice.
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 2 document no. : ssc - qp - 7 - 07 - 24 (rev.00) full code form : x 1 x 2 x 3 x 4 x 5 x 6 C x 7 x 8 C x 9 x 10 x 11 x 12 x 13 1. part number - x 1 : color - x 2 : z - power led series number - x 3 : lens type - x 4 : chip quantity ( or power dissipation) - x 5 : package outline size - x 6 : type of pcb 2. internal number - x 7 x 8 : grade of characteristic code 3. code labeling - x 9 : luminous flux ( or radiant flux for royal blue) - x 10 x 11 x 12 : dominant wavelength (or x,y coordinates rank code) - x 13 : forward voltage 4. sticker diagram on reel & aluminum vinyl bag for more information about binning and labeling, refer to the application note - 1 full code of z - power led series part no. : quantity : ### lot number : ########## bin code : x 1 x 2 x 3 x 4 x 5 x 6 C x 7 x 8 x 9 x 10 x 11 x 12 x 13
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 3 document no. : ssc - qp - 7 - 07 - 24 (rev.00) 1. dome type notes : 1. all dimensions are in millimeters. (tolerance : 0.2 ) 2. scale : none 3. slug of package is connected to anode. *the appearance and specifications of the product may be changed for improvement without notice. outline dimension cathode mark lead body lens slug cathode
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 4 document no. : ssc - qp - 7 - 07 - 24 (rev.00) 1. pure white (w49180 - 08) 1 - 1 electro - optical characteristics at i f =350ma, t a =25 oc 1 - 2 absolute maximum ratings parameter symbol value unit min typ max luminous flux [1] v1 rank v [2] 118.5 125 130 lm v 2rank v [2] 130 - - lm correlated color temperature [3] cct - 6000 - k cri r a - 73 - - forward voltage [4] v f 3.0 3.3 4 v view angle 2 ? 90 deg. thermal resistance [5] r j - s 6.2 k /w parameter symbol value unit forward current i f 700 ma power dissipation p d 4 w junction temperature t j 145 oc operating temperature t opr - 40 ~ +85 oc storage temperature t stg - 40 ~ +100 oc esd sensitivity [7] - 8,000v hbm - *notes : [1] ssc maintains a tolerance of ? 10% on flux and power measurements. [2] v is the total luminous flux output as measured with an integrating sphere. [3] correlated color temperature is derived from the cie 1931 chromaticity diagram. cct ? 5% tester tolerance. [4] a tolerance of ? 0.06v on forward voltage measurements [5], [6] r j - b is measured with a ssc metal core pcb.(25 oc ? t j ? 110 oc ) r j - c is measured with only emitter. (25 oc ? t j ? 110 oc ) [7] it is included the zener chip to protect the product from esd. -------------------------- caution -------------------------- 1. please do not drive at rated current more than 5 sec. without proper heat sink. characteristics for z - power led
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 5 document no. : ssc - qp - 7 - 07 - 24 (rev.00) color spectrum, t a =25oc 300 400 500 600 700 800 900 0.0 0.2 0.4 0.6 0.8 1.0 w 49180-07 standard eye response curve relative spectral power distribution w avelength (nm )
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 6 document no. : ssc - qp - 7 - 07 - 24 (rev.00) junction temperature characteristics 1. relative light output vs. junction temperature at i f =350ma 2. forward voltage shift vs. junction temperature at i f =350ma 25 50 75 100 125 0 20 40 60 80 100 120 relative light output(%) junction temperature ( o c ) w49180-07 25 50 75 100 125 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 w49180-07 forward voltage shift[v] junction temperature [ o c ]
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 7 document no. : ssc - qp - 7 - 07 - 24 (rev.00) -6 -4 -2 0 2 4 0.0 0.1 0.2 0.3 0.4 forward current [a] forward voltage [v] forward current characteristics 1. forward voltage vs. forward current , t a =25 oc 0 200 400 600 800 0.0 0.5 1.0 1.5 2.0 2.5 forward current [ma] relative lumious flux(a.u) w49180-07 2. forward current vs. normalized relative luminous flux, t a =25 oc
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 8 document no. : ssc - qp - 7 - 07 - 24 (rev.00) t jmax = 145 o c , @700ma ambient temperature vs allowable forward current 0 25 50 75 100 125 150 0 100 200 300 400 500 600 700 800 t o rja = 40 c/w rja t = 30 o c/w rja t = 20 o c/w current [ma] ambient temperature [ o c ] t rja = 50 o c/w typical dome type radiation pattern 0 30 60 90 -90 -75 -60 -45 -30 -15 0 0.0 0.2 0.4 0.6 0.8 1.0 w49180-07 relative luminous flux angle(deg.)
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 9 document no. : ssc - qp - 7 - 07 - 24 (rev.00) recommended solder pad note : 1. all dimensions are in millimeters (tolerance : 0.2 ) 2. scale none *the appearance and specifications of the product may be changed for improvement without notice. 1. solder pad 2. solder paste pattern
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 10 document no. : ssc - qp - 7 - 07 - 24 (rev.00) 3. reflow soldering conditions / profile 4. hand soldering conditions lead : not more than 3 seconds @max280 slug : use a thermal - adhesives pre-heating 200 180 150 ~ 0 220 240 260 rising 5 c/sec tm : reflow machine setting temp (max 30 sec.) ts : surface temp of pcb (min) ts : surface temp of pcb (max) ts : surface temp of pcb (recommend) cooling -5 c/sec time [hr] * caution 1. reflow soldering should not be done more than one time. 2. repairing should not be done after the leds have been soldered. when repairing is unavoidable, suitable tools have to be used. 3. die slug is to be soldered. 4. when soldering, do not put stress on the leds during heating. 5. after soldering, do not warp the circuit board. 6. recommend to use a convection type reflow machine with 7 ~ 8 zones.
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 11 document no. : ssc - qp - 7 - 07 - 24 (rev.00) note : 1. the number of loaded products in the reel is 500ea 2. all dimensions are in millimeters (tolerance : 0.2 ) 3. scale none *the appearance and specifications of the product may be changed for improvement without notice. emitter type reel packaging 7.00
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 12 document no. : ssc - qp - 7 - 07 - 24 (rev.00) note : 1. 6~10 reels are loaded in box 2. scale none 3. for more information about binning and labeling, refer to the application note - 1 a zled b c outer box aluminum vinyl bag b a c seoul semiconductor co.,ltd lot no : ymdd-##### q'yt : ###### po code : ## date : ###### zled 350 350 370 size(mm) type lot number : #######-####### part no. : ######-## quantity : *** bin code : ####### part : w49180-** packaging structure
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 13 document no. : ssc - qp - 7 - 07 - 24 (rev.00) ? storage to avoid the moisture penetration, we recommend storing z power leds in a dry box (or desiccator) with a desiccant . the recommended storage conditions are temperature 5 to 30 degrees centigrade. humidity 50% maximum. ? precaution after opening packaging however led is correspond smd, when led be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. attention in followed. a. soldering should be done right after opening the package(within 24hrs). b. keeping of a fraction - sealing - temperature : 5 ~ 40 humidity : less than 30% c. if the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10 - 12hr at 60 5 ? any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp after soldering. ? please avoid rapid cooling after soldering. ? components sh ould not be mounted on warped direction of pcb. ? anti radioactive ray design is not considered for the products listed here in. ? gallium arsenide is used in some of the products listed in this publication. these products are dangerous if they are burned or shredded in the process of disposal. it is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. ? this device should not be used in any type of fluid such as water, oil, organic solvent and etc. when washing is required, ipa(isopropyl alcohol) should be used. ? when the leds are illuminating, operating current should be decided after considering the package maximum temperature. ? leds must be stored to maintain a clean atmosphere. if the leds are stored for 3 months or more after being shipped from ssc, a sealed container with a nitrogen atmosphere should be used for storage. ? the appearance and specifications of the product may be modified for improvement without notice. ? long time exposure of sunlight or occasional uv exposure will cause lens discoloration. ? the slug is connected to the anode. therefore, we recommend to isolate the heat sink. ? attaching leds, dont use adhesives to generate organic vapor. precaution for use
z - power led x10490 z - power led x10490 technical data sheet rev. 01 rev. 01 october 2012 october 2012 14 document no. : ssc - qp - 7 - 07 - 24 (rev.00) z - power led is encapsulated by silicone resin for the highest flux efficiency . notes for handling of silicone resin z - power leds ? avoid touching silicone resin parts especially by sharp tools such as pincette(tweezers) ? avoid leaving fingerprints on silicone resin parts. ? dust sensitivity silicone resin need containers having cover for storage. ? when populating boards in smt production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. ? please do not force over 2000 gf impact or pressure diagonally on the silicon lens. it will cause fatal damage of this product ? please do not recommend to cover the silicone resin of the leds with other resin (epoxy, urethane, etc) ? please do not mold this product into another resin (epoxy, urethane, etc) and do not handle this product with acid or sulfur material in sealed space. handling of silicone resin leds

▲Up To Search▲

Price & Availability of W49180-08

	To Download W49180-08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .